Clean the area thoroughly with rubbing alcohol or soap and water. Do not use Windex or similar products because it will leave a 

residuebehind that wiII prevent the sticker from adhering well.

Prepare the sticker for application by firmly rubbing a squeegee or credit card across the clear Pre Mask. This removes any air bubbles that may have formed and makes the sticker cling to the transfer

tape.

Peel the Liner backing off the sticker. If the sticker clings to the backing, slowly replace the paper backing and repeat Step 2 

Slowly lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card. For best results, wait 24 hours before

moving to the next step.

Slowly peel the Pre Mask off at an angle. Be carefuI not to puII the sticker off the surface. If sticker pulls away from the surface repeat Step 4.